- 主营产品：
- 主营产品： SMT/AI OEM配件；SMT/AI原装件：如FEEDER NOZZLE MOTOR DRIVER CONTROL-BOARD SENSOR CYLINDER VALVE CUTTER等；PCB线路板锡膏印刷机配件：网板清洁卷纸，刮刀架/刀片,PCB夹边等；SMT接料胶片；防静电产品；电动工具；仪表仪器；SMT周边设备；SMT焊料：FUJI红胶/锡膏；SMT设备保养用油；SMT清洁用品：无尘纸/无尘布/工业擦试纸；波峰焊/回流焊配件等；更多信息请登录：www.smtsky.com.
- 所在地区：
- 广东 珠海 --
- 联系电话：
- 0756-3899556
- 手机号码：
- 联 系 人：
- 在线联系：
-
- 公司邮箱：
- smt@smtsky.com
- 总人气：2672
- 商铺人气：1242
- 产品人气：1419
- 资讯人气：11
产品详细
龙健供应：Mydata SMT Part Mydata SMT配件
- 型号：
- 价格：
- 最小起订量：0
- 供货总量：0
- 产品介绍
| HYDRA Speedmount 21k HYDRA Speedmount 21k, ER LVS | |||||
| Description | |||||
| The HYDRA Speedmount is an eight-nozzle mounthead for high-speed mounting of a wide range of components. It is available as an option for all MY machines and is the obvious choice for users who are experiencing or anticipate experiencing a demand for higher capacity. | |||||
| The HYDRA 21k places components at a top speed of 21,000 CPH and handles component types from 0402 chips to small SOICs and SSOPs. | |||||
| Although the component range may vary, the automatic tool exchanger included keeps productivity at a peak. The HYDRA camera allows touchless centering of all components in one single pass. At the same time, each component is inspected and dimensionally verified. The system software, TPSys, always optimizes the route when picking and placing components, and tells the operator which feeders are to be positioned where to obtain optimal speed. | |||||
| Part no. Product name | |||||
| 04010 HYDRA 21k MY9 | |||||
| 04020 HYDRA 21k MY12 | |||||
| 04030 HYDRA 21k MY15 | |||||
| 04040 HYDRA 21k MY19 | |||||
| Email:smt@smtsky.com,Website:www.smtsky.com | Email:smt@smtsky.com,Website:www.smtsky.com | ||||
| Description | |||||
| The HYDRA Speedmount is an eight-nozzle mounthead for high-speed mounting of a wide range of components. It is available as an option for all MY machines, and is the obvious choice for users who are experiencing or anticipate experiencing demand for higher capacity. | |||||
| The HYDRA 21k ER LVS places components at a top speed of 21,000 CPH and handles component types from 0201 chips to mid-sized SOICs and QFPs. | |||||
| Although the component range may vary, the automatic tool exchanger included keeps productivity at a peak. The LVS camera allows touchless centering of all components in one single pass. At the same time, each component is inspected and dimensionally verified. The system software, TPSys, always optimizes the route when picking and placing components, and tells the operator which feeders are to be positioned where to obtain optimal speed. | |||||
| Part no. Product name | |||||
| 04012 HYDRA 21k MY9, ER LVS | |||||
| 04022 HYDRA 21k MY12, ER LVS | |||||
| 04032 HYDRA 21k MY15, ER LVS | |||||
| 04042 HYDRA 21k MY19, ER LVS | |||||
| HYDRA Speedmount 21k, ER T-LVS | |||||
| Email:smt@smtsky.com,Website:www.smtsky.com | Email:smt@smtsky.com,Website:www.smtsky.com | ||||
| Description | |||||
| The HYDRA Speedmount is an eight-nozzle mounthead for high-speed mounting of a wide range of components. It is available | |||||
| Options -MY-Series | |||||
| Feeder System | |||||
| Whether you're looking for tape, stick or matrix tray feeders, MYDATA's feeders are designed to provide the utmost in reliability, performance and easy operation. And they all have one thing in common: intelligence. | |||||
| While everyone today talks about intelligence, at MYDATA we call our feeders intelligent because all our magazines and feeders have their own unique identity. This enables the machine software, TPSys(R), to automatically recognize the presence, absence and location of components. The end result is that you never have to program pick positions and can easily replenish feeders while the machine is mounting. If a feeder runs out of components, production doesn't stop. Instead, the machine alerts the operator, re-optimizes and continues mounting other components. | |||||
| Plus, with the dedicated barcode system, you can achieve higher levels of quality and intelligence. The system provides easy tracking of component and inventory data, such as batch ID numbers and quantity levels. And because barcode scanning eliminates manual entry during loading and unloading, setups and changeovers are even faster. | |||||
| Whatever your production size, job setups and changeovers are a breeze with MYDATA's feeder systems. For instance, you can load our new Agilis(TM) tape feeders in less than 10 seconds. And all our feeder solutions facilitate multiple changes at once, cutting loading and unloading time to a minimum - whether you're working with tapes, sticks or trays. | |||||
| Agilis LM8 | |||||
| Description | |||||
| Email:smt@smtsky.com,Website:www.smtsky.com | Email:smt@smtsky.com,Website:www.smtsky.com | ||||
| The AGILIS Linear Magazine 8, Agilis LM8 holds up to16 Agilis feeders for 8 mm component tape. Due to Agilis' unique feeder design, changeover and setup times can be significantly reduced. The magazine has a linear feeding mechanism that feeds the components into the machine with high accuracy and speed. The feeding pitch can be programmed to 2, 4 or 8 mm. When the magazine is inserted in the machine, each feeder is located and the pick positions are calculated. You can also fine-tune the pick positions with the joystick on the machine. An LED panel on the magazine shows the exact status of the feeders and reels. The magazine has a built-in service program and is low maintenance. | |||||
| Two handy Agilis Bins for easy handling of 7" reels are included. Handles larger reels with Agilis bins for 13" reels or Agilis Large Reel Attachment. | |||||
| Machine type: | |||||
| TP9-1 , TP9-2 , TP9-3 , TP9-4 , TP11 , TP12 , TP18 , MY9 , MY12 , MY15 , MY19 | |||||
| Requirements: | |||||
| Agilis Feeder 8, TPSys 2.4 or later, Magazine Control Unit including CAN, AT-CPU with 166 MHz processor or later. For machines with HYDRA: HYDRA 21K or HYDRA ATE (long HYDRA tools) Midas tool requirements: Tool A14S, Tool A23 rev. D or A23S rev. B, Tool A24 rev. D or A24S rev. B | |||||
| Part no. Product name | |||||
| L-014-1561 Agilis LM8 | |||||
| Agilis LM1216 | |||||
| Description | |||||
| Email:smt@smtsky.com,Website:www.smtsky.com | Email:smt@smtsky.com,Website:www.smtsky.com | ||||
| The AGILIS Linear Magazine 1216, Agilis LM1216 holds up to 8 Agilis feeders for 12 or 16 mm component tape. Due to Agilis' unique feeder design, changeover and setup times can be significantly reduced. The two feeder types can be mixed freely in the magazine, which has a linear feeding mechanism that feeds the components into the machine with high accuracy and speed. The feeding pitch can be programmed to 2, 4, 8, 12 or 16 mm. When the magazine is inserted in the machine, each feeder is located and the pick positions are calculated. You can also fine-tune the pick positions with the joystick on the machine. An LED panel on the magazine shows the exact status of the feeders and reels. The magazine has a built-in service program and is low maintenance. | |||||
| A handy Agilis Flexbin for easy handling of 4” to 15 “ reels is included. Handles larger reels with Agilis bins for 13" reels or Agilis Large Reel Attachment. | |||||
| Machine type: | |||||
| TP9-1 , TP9-2 , TP9-3 , TP9-4 , TP11 , TP12 , TP18 , MY9 , MY12 , MY15 , MY19 | |||||
| Requirements: | |||||
| Agilis Feeder 12 or 16, TPSys 2.4 or later, Magazine Control Unit including CAN, AT-CPU with 166MHz processor or later. For machines with HYDRA: HYDRA 21k or HYDRA ATE (long HYDRA tools) Midas tool requirements: Tool A14S, Tool A23 rev. D or A23S rev. B, Tool A24 rev. D or A24S rev. B | |||||
| Part no. Product name | |||||
| L-014-1562 Agilis LM1216 | |||||
| Agilis Feeder 8 3.7 | |||||
| Description | |||||
| Email:smt@smtsky.com,Website:www.smtsky.com | Email:smt@smtsky.com,Website:www.smtsky.com | ||||